Not by itself. A moisture vapor barrier laid loose over crawl dirt slows humidity, but radon moves through gaps, seams, and edges freely. A radon membrane is sealed at every seam and edge, with a fan depressurizing beneath it.
More detail
The visual difference is easy to spot once you know it. A moisture barrier is typically thin sheeting, lapped but untaped, stopping short of the walls, often held down by bricks. A sub-membrane radon system is a continuous sealed assembly: heavier polyethylene, seams overlapped and sealed, edges mechanically fastened and caulked to foundation walls and around every pier and pipe, with a suction pipe penetrating the sheet and a fan maintaining vacuum in the soil gap beneath. The sealed envelope is what lets a modest fan depressurize the whole crawl floor; an unsealed sheet just gives the gas a scenic route around the plastic. The good news for owners of moisture-barriered crawls: the prep work overlaps, and an upgrade to a sealed system usually beats starting bare. If your crawl barrier is doing moisture duty, leave it; the crawl space service builds the radon assembly to its own spec.