Radon mitigation in Falcon
What Falcon homes mean for radon mitigation
A large share of houses were built radon-ready, with gravel under the slab and a passive vent pipe stubbed to the attic or roof. Builders do not test the finished home, so the first number usually comes from the owner, and a high one is often solved by adding a fan to the existing pipe.
Falcon housing profile
- County
- El Paso, CO
- Housing era
- Mostly post-1995 housing
- State
- CO
Fast-growing post-1995 subdivisions where many houses ship radon-ready: a passive rough-in pipe that needs testing first and, if the house runs high, a fan in the attic to complete it.
Falcon's housing character: a fast-growing exurban stretch of new subdivisions northeast of the city. That shapes how we scope radon mitigation here. All of our 6 specialty lines are available throughout Falcon and the surrounding Colorado Springs metro. Click any service for full details, typical pricing, and process.
- Radon Mitigation Systems in FalconActive sub-slab and sub-membrane depressurization for Pikes Peak region basements, slabs, and walkouts, built to ANSI/AARST SGM-SF-2023 by Colorado-licensed pros.Typical: $1,200-$2,600
- Radon Testing in FalconShort-term, long-term, and real-estate radon measurement across El Paso and Teller counties, run by Colorado-licensed measurement pros.Typical: $150-$300
- Crawl Space Radon MitigationSub-membrane depressurization for dirt crawl spaces in older Springs neighborhoods and mountain homes up the Ute Pass corridor.Typical: $1,900-$3,600
- Real Estate Radon ServicesTesting and mitigation scheduled backward from inspection objection deadlines, closing dates, and PCS report dates.Typical: Test $150 · Mitigation $1,200+
- Commercial Radon MitigationMultifamily buildings, daycares, offices, and schools across El Paso and Teller counties, designed under the large-building standards.Typical: Quote-based
- System Repair & ReactivationFan replacement, gauge and alarm fixes, resealing, and retests for radon systems that have stopped doing their job.Typical: $200-$650
What each service involves in Falcon
Radon Mitigation Systems
Plenty of Falcon homes came with a passive pipe already in place, so the install often means an attic fan, a circuit to power it, a gauge on the pipe, and sealing at the sump and slab joints. Where no rough-in exists, the cored point usually goes in an unfinished storage room of the basement and the pipe follows the garage wall up. Sandy soils under many subdivisions here help one point reach the whole slab.
Radon Testing
New owners in Falcon often move in without any radon number at all, since nobody tests a house before the first family arrives. The first test belongs in the basement, finished or not, and ideally in the first heating season. In a home with a passive rough-in, the result tells you whether the pipe alone is doing enough; often it is not. After a fan goes on, a fresh test confirms the change.
Crawl Space Radon Mitigation
Crawl spaces are uncommon in Falcon's newer subdivisions, but they appear under some floor plans that pair a partial basement with a crawl under one side, and under older homes on the larger lots between subdivisions. Builder crawls usually have a thin plastic sheet laid loose over the dirt. A radon membrane replaces or covers it with a heavier sheet sealed at the walls and connected to a fan.
Real Estate Radon Services
Falcon resales are often only a few years old, and buyers sometimes assume a new house cannot have a radon problem. The test usually runs alongside the general inspection, in the basement, and the report should note whether a passive pipe is present. If a high result comes back on a home with a rough-in, both agents generally know the fix is limited, which keeps negotiation focused on the fan and the retest.
Commercial Radon Mitigation
Commercial buildings in Falcon are mostly new: schools built for a fast-growing district, retail centers along Woodmen Road and Meridian Road, churches, medical offices, and fire stations. Recent slabs usually sit on gravel and a vapor barrier, which helps suction spread, but large footprints still need several points. Measuring every ground-contact room in a new school or daycare early is far easier than retrofitting after the building fills.
System Repair & Reactivation
Most systems in Falcon are young, so repairs tend to involve installation details rather than worn-out fans: a fan wired to a switch someone turned off, a gauge never marked with its startup reading, or attic pipe that sags and collects condensation. Sump lids loosened during plumbing work are another common reason a number creeps up. Each is a short visit, followed by a check of the gauge and a retest.