Radon mitigation in Cimarron Hills
What Cimarron Hills homes mean for radon mitigation
Split-levels and bi-levels are common, pairing a partly buried lower floor with a slab or crawl section, and each part can admit soil gas by a different route. Testing above each foundation type before design keeps a system from treating one level while the other keeps leaking.
Cimarron Hills housing profile
- County
- El Paso, CO
- Housing era
- Mostly mid-century housing
- State
- CO
1970s and 80s stock east of Powers with basements, split-levels, and crawls mixed by street. Split-levels deserve a test on each foundation type before any design is drawn.
Cimarron Hills's housing character: an unincorporated 1970s and 1980s neighborhood east of Powers Boulevard. That shapes how we scope radon mitigation here. All of our 6 specialty lines are available throughout Cimarron Hills and the surrounding Colorado Springs metro. Click any service for full details, typical pricing, and process.
- Radon Mitigation Systems in Cimarron HillsActive sub-slab and sub-membrane depressurization for Pikes Peak region basements, slabs, and walkouts, built to ANSI/AARST SGM-SF-2023 by Colorado-licensed pros.Typical: $1,200-$2,600
- Radon Testing in Cimarron HillsShort-term, long-term, and real-estate radon measurement across El Paso and Teller counties, run by Colorado-licensed measurement pros.Typical: $150-$300
- Crawl Space Radon MitigationSub-membrane depressurization for dirt crawl spaces in older Springs neighborhoods and mountain homes up the Ute Pass corridor.Typical: $1,900-$3,600
- Real Estate Radon ServicesTesting and mitigation scheduled backward from inspection objection deadlines, closing dates, and PCS report dates.Typical: Test $150 · Mitigation $1,200+
- Commercial Radon MitigationMultifamily buildings, daycares, offices, and schools across El Paso and Teller counties, designed under the large-building standards.Typical: Quote-based
- System Repair & ReactivationFan replacement, gauge and alarm fixes, resealing, and retests for radon systems that have stopped doing their job.Typical: $200-$650
What each service involves in Cimarron Hills
Radon Mitigation Systems
Split-levels and bi-levels in Cimarron Hills often need two draw points: one cored through the lower-level slab and a membrane over the section that sits on a crawl. A single fan can usually pull both if the pipe is sized for it. The run commonly goes up through the garage that sits beside the lower level, then out above the eave, which keeps pipe out of the living space entirely.
Radon Testing
In a Cimarron Hills split-level, the lowest lived-in level is usually the family room a half-flight down, and the standard test goes there. If the upper living area sits over a crawl, a second device on the main level shows whether that crawl is adding radon of its own. Bi-levels whose lower floor holds bedrooms should be tested in one of those bedrooms, since that is where people spend the night.
Crawl Space Radon Mitigation
Crawl spaces here usually sit under the upper half of a split-level, reached through a hatch in the lower-level wall. They are short and often crowded with ductwork and plumbing, so the membrane has to be worked around supports and sealed up the block walls. Tying it into the same fan as the lower slab is the normal approach, leaving one system and one gauge for the whole house.
Real Estate Radon Services
Cimarron Hills sits unincorporated near Peterson and the airport, and its homes often sell to buyers wanting a lower price than the newer subdivisions farther east. A buyer's radon report should state which level the device ran on, since split-levels can read differently floor to floor. If the result is high, the objection can ask for a system that treats both the slab and the crawl sections, not just one of them.
Commercial Radon Mitigation
Much of the non-residential stock around Cimarron Hills is light industrial and flex space along Platte Avenue and near the airport, plus churches, schools, and small retail centers. Warehouse slabs are large and often cracked along their control joints, so diagnostics decide how many suction points a building needs. Offices built into the front of a flex building are where people actually sit all day, and those get measured first.
System Repair & Reactivation
Many retrofit systems in Cimarron Hills have been running for years in homes built in the 1970s and 1980s, so tired fans and dried-out caulk are common findings. A frequent problem is a split-level system that only ever treated the lower slab and left the crawl alone; a membrane added and connected to the existing pipe usually brings the number down. Missing gauges get added during the same visit.